Simple. Efficient. Dependable.

15 Bale Flat



Click on image to view 360 degree gallery

1534F Accumulator

Features

  • Our largest configuration for bales on their strings.
  • Handles bales from 32” to 44” long
  • Bundle dimensions are 90” wide by 96” to 132” long
  • Configuration can be used to fill van trailers from the rear.
  • Fills a 24' wagon nicely.
  • Handles 14x18" and 16x18" bales from 32" to 44" long at whatever density is needed, with no adjustments.
 

1534F Working Dimensions: 25’2"L x 9’6"W x 11’6"H
1534F Shipping Dimensions: 24’L x 9’6”W x 3’10”H

How the Accumulator Works:

The innovative design of the accumulator allows it to be fully automatic without the use of hydraulics or electronics. Using excess energy from the baler plunger, the bales are pushed up and out the top of the front chute. There is no extra pressure applied to the plunger and the chute does not deform the bales. As gravity moves the bales downward, the last bale in each row swings a gate to open the next row. The last bale in the grab opens the back gate. As the accumulator unloads itself, springs and counterweights automatically return all of the gates back to their starting position, ready for the next bale.

 

The Kuhns Hay Accumulator is built from the ground up as a durable machine. The concept has logged thousands of hours in many different areas, terrains, and types of hay with exceptional customer satisfaction.

Set up your baler in 4 easy steps: bolt on the bale chamber extension, adjust the hitch to the correct position, trim the guide belt to the proper length, and loosen the pressure in the bale chamber to compensate for the back pressure caused by pushing the bales up the chute.

Click on image to view 360 degree gallery

KN615F Tie-Grabber

The KN615F picks up the bales 5 wide and 3 long on their strings, using 30 teeth on 6 bars. The operator approaches the bale group with a strand of twine already stretched across the back plate of the Tie-Grabber. The hydraulic squeeze bar ensures the group is packed tightly together  before the teeth are set. After the teeth are set, the arm completes the rotation around the group and the knotter ties the twine tight, ensuring stable transportation to storage. The KN615F handles 14x18" and 16x18" bales 32"- 36" long with no adjustments. If you want your bales longer than 36", an extended version of this model is available.

Features:

  • Configuration can be used to fill van trailers from the rear.
  • Fills a 24' wagon nicely.

KN615F Working Dimensions: 95"L x 89"W
KN615F Shipping Dimensions: 109”L x 95”W x 30”H
KN615F Weight: 1515 lbs

Requires:
Loader with at least 2500lb lift capacity*
Two sets of remotes

*Lift capacity is an estimate based on an average bale weight of 40-50 pounds. However, it is up to the individual to determine their specific loader requirements.

How the Tie-Grabber Works

The primary hydraulic circuit operates the bale squeeze and the bale hooks. When activated, the squeeze bar pulls the bales in. A sequence valve then automatically activates the bale hooks. The secondary hydraulic circuit operates the twine arm and the knotter. The twine arm starts on the right hand side, and when it completes its rotation, a valve automatically diverts the flow to the knotter.

 In Detail:

With the squeeze arm out and the twine arm on the right-hand side, the operator will align the left side of the Tie-Grabber with the left side of the group of bales on the ground and push the group forward to compact the group. The angle of the squeeze arm will pull the bales in as it moves forward. When the bales are compacted length wise, the operator will activate the primary hydraulic circuit. This will pull the squeeze arm in, compacting the bales sideways. The bale hooks will automatically begin to set, so the operator needs to make sure the Tie-Grabber is firmly set on the group so the hooks can set properly. With the bales properly secured, the operator can safely lift and move the group.

While traveling with the loaded Tie-Grabber, the operator will activate the secondary hydraulic circuit. The twine arm then rotates to the left side for the twine to be tied securely with the Rasspe knotter. When that is finished, the hay is ready to be deposited. When traveling to the next group the operator can return the twine arm to the right hand side.

Click on image to view 360 degree gallery

615F Grabber

Th615F picks up the bales 5 wide and 3 long on their strings using 30 teeth on 6 bars. It handles 14x18" and 16x18" bales 32"- 36" long with no adjustments. If you want your bales longer than 36", an extended version of this model is available.

Features:

  • Configuration can be used to fill van trailers from the rear.
  • Fills a 24' wagon nicely.

615F Working Dimensions: 95"L x 89"W
615F Shipping Dimensions: 105”L x 89”W x 22”H
615F Weight: 815 lbs

Requires:
Loader with at least 2100lb lift capacity*
One set of remotes

*Lift capacity is an estimate based on an average bale weight of 40-50 pounds. However, it is up to the individual to determine their specific loader requirements.

Video